#1
|
||||
|
||||
Curtis Mathes, You Know Where
Yep, another one out there on ebay. This one is in Indianapolis.
http://cgi.ebay.com/ws/eBayISAPI.dll...766214023&rd=1
__________________
Bryan Last edited by bgadow; 04-11-2005 at 02:34 PM. |
#2
|
||||
|
||||
ow! this is getting on the edge of a practical trip to pick it up -- but it would go with my LR furniture, even better than the Maggie I bought from Doug - (thinking......)
|
#3
|
||||
|
||||
By the way, anyone know what RCA this might be similar to?
|
#4
|
||||
|
||||
The Curtis Mathes roundies of this time seem to be a cross between the CTC15 and 16. The audio board is set up like a 15... would have the audio output tube on the audio board (unlike the 16 that places this tube on the metal chassis). The high voltage cage is set up like a 16... uses a focus rectifier tube (unlike the 15 that uses a solid state rectifier). At least, that's the way it is on my Curtis Mathes. I think the CM chassis in mine is a C-20.
__________________
Charlie Trahan He who dies with the most toys still dies. |
#5
|
||||
|
||||
thanks
i can drive down and get it just bid on it 100.00
larry melton
__________________
[IMG] |
Audiokarma |
#6
|
||||
|
||||
cataract on crt
i have an almost new jug to put in it, then i will try the heat gun process to remove the safety glass and clean out the mold
__________________
[IMG] |
#7
|
||||
|
||||
oldtvman is on the case
Thanks for the tip my current bid is $50 I hope it holds up, then 148 miles one way to go pick up the beast
__________________
[IMG] |
#8
|
||||
|
||||
Darn
My friend's looking for one for his home uptate, but he's in finals now and i'm tied up at work. *sigh*. Hopefully this summer a good Nimitz-class console will show up... |
#9
|
|||
|
|||
Uptate? :-) You just reminded me of what the Jerky Boys say "I'm from UPstate!"
Anthony |
#10
|
||||
|
||||
This is Kissel. You know where I can get a duck cleaned ? Quack, quack, quack....-Sandy G.
__________________
Benevolent Despot |
Audiokarma |
#11
|
|||
|
|||
I would like to buy some salami, and some boloney, bo-log-nahz.
See here: http://audiokarma.org/forums/showthread.php?p=323829 |
#12
|
||||
|
||||
money order was sent out today, will go down to indy to pick up the beast anyone want to help load it ?
__________________
[IMG] |
#13
|
||||
|
||||
Remember the commercials-"Curtis Mathes-The most Expensive Television in America-And Darn Well Worth It !" They had cheek, that's for sure.-Sandy G.
__________________
Benevolent Despot |
#14
|
|||
|
|||
BUTT cheek!
I used to hear people derisively say that CM made some very fine electronic furniture. Anthony |
#15
|
|||
|
|||
The last time that I was in Athens, Texas, I drove by the old Curtis Mathis factory. It has been empty for years. I also have heard that there is some ground contamination around it, so it will be hard for anyone else to move in.
The TV shop that I cleaned out was in Athens, so it has some Curtis Mathis items in it. Is this name still used by anyone as is the RCA name? |
Audiokarma |
|
|