#1
|
|||
|
|||
Convergence issue right and left R/G
Been fussin with the final registration on a CTC-16 and right and left sides were way off to the point of affecting purity in that area. The answer was in plain sight all along. When recaping a set, don't forget the convergence panel! I don't have a cap checker that applies voltage so when I removed them I checked them anyway on a digital unit I have and they checked as marked.
The replacements however made all the difference and I can get almost perfect convergence. The .082 and the .12 were replaced with .1's and I still had adjustment range either way. This is a set put together from a combo and put in a standard cabinet that I striped and refinished. I'll post some pictures soon. All it needs is some Hang-Tags. Last edited by 6GH8cowboy; 08-16-2013 at 10:30 AM. Reason: add photo |
Thread Tools | |
Display Modes | |
|
|