#1
|
||||
|
||||
"Teardrop" '39 RCA Victrola
I got hooked on these small deco bakelite phono "attachments" and just had to add a "teardrop" model to my collection. They were made by RCA and GE. It's a 1939 RCA Victrola R-100 This one, I believe, was a John Vassos creation and a small streamline-modern work of art. It was in sad shape when I got it and needed hours of fixing-up including some new wiring, grommets, re-flocking, polishing, and decal replacement. The old crystal cartridge, naturally, is no good and will be replaced by a ceramic one soon. The simple syncro motor runs fine and, amazingly, the rubber motor "hangers" are still pliable!
Last edited by Celt; 02-10-2018 at 06:19 AM. |
#2
|
||||
|
||||
Excellent!
__________________
Let me live in the house beside the road and be a friend to man. |
#3
|
||||
|
||||
Thank you. Amazing that I invested about 10 hours so far into this simple little phono, but that's the fun of the hobby.
|
#4
|
||||
|
||||
You said it, this hobby is definitely not about cost recovery. Looks really nice! Is this one of the ones where you have to give it a push to start the motor?
|
#5
|
||||
|
||||
Quote:
The phono has a very simple synchronized motor that "floats" on 3 metal rods that are inserted into flexible rubber hangers. You just put the record on the platter, put your fingers on the center label and give it a sharp spin. It comes right up to perfect speed. They do easily stop when you grab the record to remove it. If these were complicated with idler wheels I likely would not bother with them. |
Audiokarma |
#6
|
||||
|
||||
Quote:
I really like the simplicity of that player, I hope you have some good 78s for it! 78 collecting is a bizzare world, with 95% junk and a few good ones, with very few sellers who know what they are doing. |
#7
|
||||
|
||||
How was the re-flocking done?
jr |
#8
|
||||
|
||||
Thanks Max - The simplicity of these units is why I like them. This is my third one now!
I have at least a couple of hundred 78's from decades of collecting them. A lot of great popular jazz from the '20's to the '40's. I have some rock and roll too. I will always prefer 78's to any other records. jr - I want to say flocking is easy, but you have to be careful to follow the directions exactly as stated. I find applying the paint/adhesive in the right amount and getting the flocking on before it dries a little nerve racking, but so far I've had good results. You need to get the platter down to metal and then apply several coats of red/brown primer first. You can get the flocking kits on eBay, but get one with a good amount of flocking so you have enough. |
#9
|
|||
|
|||
I have a similar 'Teardrop', although it came with some interesting modifications... Note that I bought it anyway.
Steel tonearm, for those heavy metal disks. Chunk of wood integrated into cartridge mount, easily pre-dating Grado by four decades. A few strategic lightening holes, lowering tracking force down to a sedate 16 oz. or so... Severe abrasion on front edge of "tonearm" makes me think someone dragged it around behind a station wagon at some point. And perhaps "tone-leg" would be a better match for its heft. Last edited by Chip Chester; 02-21-2018 at 01:26 PM. |
#10
|
||||
|
||||
Quote:
__________________
Tom C. Zenith: The quality stays in EVEN after the name falls off! What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4 |
Audiokarma |
#11
|
||||
|
||||
It's got speed holes!
Makes it go faster. |
#12
|
|||
|
|||
You may consider me looking for that now...
|
#13
|
||||
|
||||
I see these early bakelite phono attachments often come-up for sale with replaced/upgraded tone-arms. They're often more modern looking than the rest of the unit with a clashing color. With models like my R-100 and particularly the GE version with the "locomotive" art-deco tone-arm, this will seriously hurt the units value and desirability.
|
#14
|
|||
|
|||
It looks like the original arm had five holes, about 1/2" in diameter. Then the electric drill was invented, and they went nuts. I bought this about 10 years ago at a standard antique mall. No other similar items around. I think it would be easier to make a new arm out of sheet steel than it would be to repair that one to original look. Yes, even with the compound curves in the original. I do have CNC mill access where I could mill it nice and thin, but out of solid. Might be an interesting project... Could even go aluminum, even though it would still weigh a ton.
|
#15
|
||||
|
||||
Quote:
As for weight... couldn't you just put a chunk of lead on the other end? I'm reasonably sure you could adjust it to any weight with a little ingenuity. |
Audiokarma |
|
|