#1
|
||||
|
||||
A very long shot!!
hi.
I have recently managed to get a nice EMI 201 camera head, it is in fine condition and filled with enthusiasm I dug out the 201 CCU, that I knew I had, from its hidey hole at the back of the store. I knew it had a board missing, but I was disappointed when I opened it up and found that 3 boards were missing. I had it in my minds eye that I would make the missing board, but three boards took some of my enthusiasm away especially as one of the missing boards has the line and field scans for the camera on it, transformers and all! Has anyone got any spares for this CCU? the missing boards are Nos. 1, 3 & 4. Picture of the camera attached, Picture of the CCU here, http://www.tvcameramuseum.org/emi/201/201emi1.htm Regards Brian Summers http://www.tvcameramuseum.org |
#2
|
||||
|
||||
Sorry to hear about the missing boards .These must be a very rear camera to find complete.I have not seen one with a CCU yet . {Except yours}
|
#3
|
||||
|
||||
Very cool green styling.
Does it incorporate any transistors ? |
#4
|
||||
|
||||
41 valves in the camera and CCU and I think just two transistors in the talkback ampifier.
Brian |
#5
|
||||
|
||||
41 Tooobs ?!? Ho-Lee Hannah !....Tryin' to heat Westminster Cathedal, are you ?!?
__________________
Benevolent Despot |
Audiokarma |
Thread Tools | |
Display Modes | |
|
|