#1
|
||||
|
||||
2013 Emerson 32" LED model LF320EM4 help needed
Rescued this set curbside. Had no visual damage or defect so picked it up for my 10 yr old daughter. Set actually turns on, runs with good sound and button functions but no imaging. Screen lights up with good light but no displays, menu, volume meter or pic. Connected did and nothing but sound. Couldn't be the output connections since even the menu won't display. What should I look for and is this a simple fix or impossible?
Last edited by pac.attack76; 07-14-2016 at 02:46 PM. |
#2
|
||||
|
||||
Quote:
Just a thought that might help...
__________________
Brian USN RET (Avionics / Cal) CET- Consumer Repair and Avionics ('88) "Capacitor Cosmetologist since '79" When fuses go to work, they quit! |
#3
|
||||
|
||||
There's a blue vga plug back there. I'll have to see if I have a cable to try it.
|
#4
|
|||
|
|||
Might want to check the LCD ribbon cable.
|
#5
|
||||
|
||||
Cool, will check that too.
|
Audiokarma |
#6
|
||||
|
||||
Lcd ribbon cable fine. No change. Now to find my vga cable.
|
#7
|
||||
|
||||
After a full diagnosis, I've come down to replacing the main board. Video section. Actually contains all the hdmi sockets and connections. $22. Hooking up a did player and switching through the inputs, the buttons all work, sound works, no video at all.
|
#8
|
||||
|
||||
Signal board, that's the board that has RCA, hdmi, cable connections. Or the connection link between the signal board and the tcon board.
|
Thread Tools | |
Display Modes | |
|
|