#1
|
|||
|
|||
Schematic for Juliette NA-7021 transistor radio?
Hi,
Has anyone got a schematic and/or service info for this radio? Ive been looking, but no luck so far. Any help greatly appreciated. regards, JEFF |
#2
|
||||
|
||||
Hi Jeff,
Juliette was a brand name of a company (Topps import/export) who distributed tons of low-end Asian radios throughout the US in the 60s-80s. When I was in school, I worked for a similar outfit (Alaron) who did the same basic thing (Rhapsody brand.) Quality was hit and miss, more miss than hit. But, I digress... In the case of Alaron/Rhapsody, we rarely had any information on the stuff we worked on; if we were lucky, we might have had a photocopy of a hand drawn schematic for any particular model, but I don't remember ever having much more than that. Since Topps/Juliette was likely dealing with many of the same OEMs, I would be surprised if things were much different in their repair department and that there's a good chance that there just wasn't any literature produced for most of their products. On the bright side, most of that stuff is relatively simple and shouldn't be to hard to figure out. When new, that stuff was plagued by poor solder joints, broken PC traces and bad earphone jacks, so I'd expect to find that sort of thing in addition to a bunch of 30 year old failed electrolyitics. Every once in a while, you can find a diamond in the rough from some of these companies; I bought a mid-60s Rhapsody 6 transistor AM pocket radio a few years ago, and after changing the bad caps, it plays better than some of the similar radios in my collection that were made by "real" manufacturers. Good luck! -Steve |
#3
|
|||
|
|||
Thanks for the info Steve. Youre probably right, the set might not be too much of a mystery once tackled.
regards, JEFF |
#4
|
||||
|
||||
My Juliette had a bad earphone socket which I jerry-rigged a new one into. Sold it at a "yardie" in 2011.
|
|
|