#31
|
|||
|
|||
I suggest you post for some knobs. I just traded an NOS part for some "D" line knobs so I am sure there some out there. You may have better luck than buying a whole TV and the shipping will be much less. The "Bar-over-knob" assembly will be a lot to hope for. Pictures from a benevolent owner would be very helpful.
I do remember one or two blonde 123s. They used lighter colored knobs. |
#32
|
||||
|
||||
Quote:
The vent slot opening is 1/2-inch and the real estate between vent slots is 1/2 inch. [see note 1] Vents themselves are 7.5 inches end-to-end. Vents in a given set are separated (horizontally) by two inches. Vents are located only on one side of the cabinet. The other side, however, has a port for accessing 21AXP22 convergence magnets. This port is a 16-inch wide by 6 13/16-inch deep rectangle located five-inches down from the top of the cabinet and flush with the front of the cabinet. Finally, the odd-size speaker openings, which can't represent anything but some screwball marketing hype idea, are 2-3/4 by 7-3/4 vertical slots. Each speaker opening has a round 8-in. pm speaker behind it. Note 1: If you want to be exact, the actual vent slot opening is 9/16 inch with 7/16 inch of real estate between. Pete |
#33
|
||||
|
||||
Quote:
Pete: Philco called the screwball marketing hype: "Phonorama Acoustic Lens System" Chuck
__________________
www.myvintagetv.com Learn from the mistakes of others - You can't live long enough to make them all yourself. |
#34
|
||||
|
||||
...
|
#35
|
||||
|
||||
This might be of interest?
|
Audiokarma |
#36
|
||||
|
||||
Fabulous find Eric. I only hope "c1827" or the final winner is one of us AK'ers...
|
#37
|
||||
|
||||
Quote:
__________________
<< Hi Gianni! By the way, no need to apologize for your English, you speak 3 languages! __________________ John Folsom >> |
#38
|
||||
|
||||
Pete,
Yes, it's "one of us" Chuck
__________________
www.myvintagetv.com Learn from the mistakes of others - You can't live long enough to make them all yourself. |
#39
|
||||
|
||||
__________________
<< Hi Gianni! By the way, no need to apologize for your English, you speak 3 languages! __________________ John Folsom >> |
Thread Tools | |
Display Modes | |
|
|