Zenith F2-735W w/ 16F23 chassis

[zeno]

Look in Sams & see if it shows resistors & or caps
mounted inside the yoke. Compare values.
Also someone here has the factory manual, check
that too.
Keep in mind a slightly weak damper, output or osc
tube can do this & not show BAD on a checker.

73 Zeno

[heats00]

Well, all that for naught...just looked at the old yoke again, and it is the 95-1768.

Zeno, I do have the factory service manual, it is what contains the conflicting data.