#16
|
||||
|
||||
The .0015 you refer to is that the .0012 to ground, was that a typo ?
|
#17
|
||||
|
||||
The sine wave coil on the schematic I have from ETF shows that coil as L155 unless there is another listed as L16 . The .01 cap across the sine wave coil I changed already with no improvement and I checked the coil it is not open. So it won't be easy to watch 3 images , lol .
Last edited by timmy; 12-14-2017 at 05:00 AM. |
#18
|
|||
|
|||
It was supposed to be .0012 . It was a typo!
|
#19
|
||||
|
||||
So I did use Micas for the .0012 cap which equals 1201pf and still I have the 3 images and the sine wave coil after turning Alittle bit had no affect unless it has to be turned several times. I also checked the 6.8 meg resistor at that coil not off that much.
Last edited by timmy; 12-14-2017 at 09:54 AM. |
|
|