#16
|
||||
|
||||
Quote:
17-19" sets used the 800-860 kit, AFAIK. Correct me if I'm wrong... I know of one other kit, the 800-896, but I think it's for flat chassis sets. All you really need out of the kit is the cap and the sleeving - most caps can hold themselves in place without the zip tie, and the label for the back is most likely dried out by now.
__________________
Brian USN RET (Avionics / Cal) CET- Consumer Repair and Avionics ('88) "Capacitor Cosmetologist since '79" When fuses go to work, they quit! |
#17
|
||||
|
||||
http://www.ebay.com/itm/ZENITH-RADIO...8AAOSwjXRXcAIA
The focus divider is the kit for 4 tube hybrids. 73 Zeno |
#18
|
|||
|
|||
I've seen it in Zeniths. It cuts the neck off right where the neck joins the bell of the jug. Perfectly clean cut, slick as a whistle.
|
#19
|
||||
|
||||
Quote:
Thanks for checking your stash. Quote:
So the 800-860 caps can vary in value? I got out my other one and both are marked 22-7504-01, *but* have different codes above that. Both start with a 2 with a circle around it and 715PC. One follows that with 7817 and the other 8239. Last edited by Jon A.; 10-14-2016 at 01:31 PM. |
#20
|
||||
|
||||
Quote:
715PC later became 716P dielectric, for pulse applications. 716P are all 800V, 1000V, 1200, or 1600V caps....
__________________
Brian USN RET (Avionics / Cal) CET- Consumer Repair and Avionics ('88) "Capacitor Cosmetologist since '79" When fuses go to work, they quit! |
Audiokarma |
|
|