#37
|
||||
|
||||
I was wondering about the fly change and that resistor.. I'll end up putting it back in..
As for UHF, all the little pins are making contact, and I did bend them slightly with a jewelry screw driver.. There are a bunch of caps and resistors under the mechanism.. I'm not going to remove the channel mechanism to check those resistors.. I'm not sure where the B+ is coming from, it's very hard to follow the schematic as it shows different tuners..
__________________
Looking for an all tube or hybrid color TV set from the late 1960s, early 1970s that's in a steal cabinet.. Last edited by tvcollector; 02-17-2015 at 05:34 PM. |
|
|