Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early Color Television

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #76  
Old 12-28-2013, 11:01 AM
DaveWM DaveWM is offline
VideoKarma Member
 
Join Date: Feb 2009
Location: Orlando FL
Posts: 5,607
try subbing a new video out tube. also check the brightness pot and the resistors and coil around the service switch.
Reply With Quote
  #77  
Old 01-17-2014, 06:45 PM
Eric H's Avatar
Eric H Eric H is offline
Administrator
 
Join Date: Jun 2002
Location: So. Calif
Posts: 11,565
Video of set running

I finished recapping the set and made this quick video to show the set running, the color is actually a lot better on the set than it is in the video but the image is just too dark to be watchable in a normally lit room.
It looks okay in the video but the camera amplifies the light and it was taken in a dark room.

All the screen controls are full on as is the Kine Bias.
Is the 21FJP22 biased differently than the 21CYP22? I would think the CYP would be driven harder since it had less efficient Phosphors.

Other issues are getting the sound and image to work together and but I expect some alignment problems considering the coil swaps that were done, my main concern is why it's so dark.

http://www.youtube.com/watch?v=qnFWQ8wnLHc
Reply With Quote
  #78  
Old 01-17-2014, 10:46 PM
bandersen's Avatar
bandersen bandersen is offline
RCA 741PCS
 
Join Date: Mar 2009
Location: Chicago, IL
Posts: 8,085
The Tick never looked so good Nice job
__________________
Here are my Vintage Radio & TV YouTube Channel and Photo Gallery
Reply With Quote
  #79  
Old 01-19-2014, 01:01 AM
kramden66 kramden66 is offline
VideoKarma Member
 
Join Date: Nov 2010
Location: Rockaway, NJ
Posts: 1,414
I noticed with the admiral ctc-12 clone that if you tune the picture out to where you almost loose it completely it gets darker and the color level increases , if you yune back to normal its bright and if you turn back too far to where it just shows black and white it still is bright , so I go with the align the ifs then it might be ok , it might even be good to the point where you could use the rejuved crt if you care to.

mike
Reply With Quote
  #80  
Old 10-09-2017, 06:11 PM
LADR's Avatar
LADR LADR is offline
Местное и дх радио
 
Join Date: Mar 2017
Location: Birmingham, AL
Posts: 189
Any more updates?
Reply With Quote
Audiokarma
  #81  
Old 10-09-2017, 10:47 PM
Eric H's Avatar
Eric H Eric H is offline
Administrator
 
Join Date: Jun 2002
Location: So. Calif
Posts: 11,565
Quote:
Originally Posted by LADR View Post
Any more updates?
No, it's just been sitting in the back bedroom, it works but not correctly, it just doesn't seem to have enough luminance.

Also I replaced the Chroma board and several of the crumbled coils on it so that needs an alignment also, something I'm not equipped to do.

Too many projects, not enough time or space.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:36 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.