Quote:
Originally Posted by Electronic M
Nope, Astatic 710 d. All I was able to find back around Christmas was a whole cart for $60....Being unemployed then the prospect of spending 3X what the player that needs it cost me (albeit I got a killer deal on that Admiral) seemed like a bad idea.
Same change in the console in this thread. http://videokarma.org/showthread.php?t=269968
Most tone arm hardware is small and delicate/precise enough that welding seems like shooting flies with a bazooka...Soldering may be the way to go. I have some 150W irons the BIG old ones. Those can make new chassis ground solder points better than factory on TV and radio chassis and join steel pieces really well. The trick is to clean (sand down to fresh metal if you must) and tin the pieces with (LEAD*) solder first not in the crack but on the adjacent edges, place the crack back together as it was before the split then join the tinning with the iron, holding the pieces absolutely still till cool. One can make some surprisingly strong solder joints that way.
*ROHS can kiss my but! Silver solder takes too much heat, makes lousy joints, mixes poorly with lead joints, and flows wierdly. |
Actually Silver solder is the solder of choice for repairing antique fan cages where the original spot welds had failed and it forms a nice strong bond on both steel and brass fan cages and it cleans up to the point of being nearly invisible (the repair that is). So Silver Solder isn't that bad!
03-21-2019, 12:14 AM
Threaded Mode