#31
|
||||
|
||||
Hi Bob,
Do you remember this place? Check out the list price of a new 21AXP22A in 1960 Kevin Last edited by Kevin Kuehn; 01-19-2011 at 10:38 PM. |
#32
|
||||
|
||||
Hi Kevin,
I'd figured I get Madison represented in this Wisconsin-centric part of the thread. You are lucky to have Bushland radio near by. The last of the old-time TV repair shops around here closed years ago. That's good news about the fly. That set looks fairly low mileage to me. I wonder if what looks like melted insulation on the cracked HOT lead was actually a repair attempt With the temps going way below zero tonight, it a good time to be around glowing vacuum tubes! -Clark (in Madison) |
#33
|
||||
|
||||
Quote:
A lot of people were employeed by Taylor Electric. When RCA started going down the tubes, Taylor Electric started shrinking it's opperation. Eventually all those Taylor employees lost their jobs due to the demise of RCA. And then multiply this by all the other RCA distributors across the entire country and you begin to realize how bad a thing it was that RCA went under. This is a prime example of why we, as Americans, need to get back into manufacturing. It's not just the people who work in the factories who have jobs, it's all the ancilary jobs that are attached to those manufacturing companies. Service, sales, and parts distribution companies all who depend on the manufacturing of American products. Hopefully the future will see the pendulum swing back in our direction. With jobs as difficult to get as they are today, there is bound to be pressure for our cost of labor to become more competitive in the world ecconomy. When that happens, we will once again be able to compete in manufacturing, and our ecconomy will thrive again. But not until manufacturing recovers, will we see a substantial reduction in unemployment. Sorry for the rant, but the demise of RCA was, in my opinion, a failure equal in proportion to if the US auto industry had gone under. We must stop the exportation of our manufacturing base to foreign countries. We have the technology, the skil and the know-how, all we need is a competitive labor pool. $160 for a 21AXP22 in 1960 was big money. Even a 15GP22 was $160. In todays dollars it would be $1175. So I guess I better revalue my color sets with good 21AXP22 crt's in them. Lets see, I think I have 9 of them currently. Woops forgot the 21AXP22 test jig, so that makes and even 10.
__________________
Vacuum tubes are used in Wisconsin to help heat your house. New Web Site under developement ME http://AntiqueTvGuy.com |
#34
|
||||
|
||||
Quote:
I guess Eau Claire must be the regional hot spot for old TV guys to hang out. I honestly don't understand what keeps a place like that going these days. There must be some local industry or medical demands that I'm not aware of. I seriously doubt they're selling much to the consumer electronics-servicing segment today. Both Bushland and Indianhead down on Barstow are like walking into a time warp. Very cool, but also a little sad to see all the old parts setting around that hardly no one wants any more. I hope more people like Bob can save a bunch of these parts before they end up in the dumpster. Unfortunately most of what’s left of the NOS is likely 70’s and 80’s vintage TV parts. Kevin |
#35
|
||||
|
||||
Quote:
Very interesting about RCA and Taylor. No problem with the rant, I'm right there with you, on those thoughts. I sure hope we can bring back some or manufacturing base to this country. Along with lower labor cost, we also need to start teaching our youths the value of saving up for something nice that’s made with pride right here in this country. Instead of the "I want it now", and "I need it cheap" attitude. Kevin |
Audiokarma |
#36
|
||||
|
||||
I got the SAMS folder for my set. The only CRT listed for this set is a
21FBP22 Kevin |
#37
|
||||
|
||||
Quote:
My CTC-10 set.... I'd list the model if I had one anywhere on the set.... came with a CYP22. Its neck was broken when the set fell into my hands. I had a FBP tube from another set on hand at the time, and used it for my set. I found out a few years ago, that I should make circuit changes in my '10' to get better color from the FBP. I used the set with the first FBP tube for over 10 years before I bought a rebuilt tube from Video Display in Atlanta. That tube is still trucking along, and still has the original CYP circuitry. I've wondered recently how much better this old girl might look with the mods. Good luck with your restoration. Bruce |
#38
|
||||
|
||||
Midnight Madness
I replaced the cracked plate cap wire going to the HOT, then popped a new
6DQ5 in along with replaced the 6DE4 sub with a new 6AU4. Then I slowly brought the set up on the metered variac with a second current meter in the cathode of the 6DQ5. It isn’t pretty, but it's trying to do its thing. Pretty exciting to see that big round CRT light up, got so excited I couldn't hold the camera straight. Gonna have to go have a couple beer's now and see if I can get some sleep Kevin |
#39
|
||||
|
||||
Lookin' good
|
#40
|
||||
|
||||
The other night I touched up the vertical linearity and height. Then I tried moving those center convergence magnets around as best I could while looking through that big scab on the CRT. I'm about finished messing with it until I get the nerve to pull the CRT and do the surgery. Still not sure if I like that process.
Kevin Last edited by Kevin Kuehn; 01-26-2011 at 08:36 PM. |
Audiokarma |
#41
|
||||
|
||||
Looking very promising! I don't think I've ever seen a cataract so perfectly round in all my life, it almost looks like there's a target on.......OOPS no politics
__________________
My TV page and YouTube channel Kyocera R-661, Yamaha RX-V2200 National Panasonic SA-5800 Sansui 1000a, 1000, SAX-200, 5050, 9090DB, 881, SR-636, SC-3000, AT-20 Pioneer SX-939, ER-420, SM-B201 Motorola SK77W-2Z tube console McIntosh MC2205, C26 |
#42
|
||||
|
||||
that set looks good.the color and tint looks spot on.when you do the surgery, that will be a beautiful set to have.great find and save!
|
#43
|
||||
|
||||
Quote:
It's OK Mark, you're not working for CNN so you can say whatever you want!
__________________
Evolution... |
#44
|
||||
|
||||
You guys are toooo funny
I was thinking this TV has a built in test target, was way before it's time. Kevin |
|
|