Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early Color Television

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #76  
Old 10-09-2018, 12:28 PM
benman94's Avatar
benman94 benman94 is offline
Resident Lunatic
 
Join Date: Jun 2011
Location: Detroit, MI
Posts: 1,129
http://www.earlytelevision.org/class..._for_sale.html

The tail end of that page.

Now, the RCA part numbers for the vertical convergence transformer in the Westinghouse and the transformer in the CT-100 are in fact different; the Westinghouse is 241T1 while the CT-100 uses part 3T127.

But, I have a parts catalog that shows them cross-listed as identical. I think it is safe to assume they're the same part; one part number used for OEM transformers in sets built by other manufacturers, one part number for sets built in-house by RCA.
Reply With Quote
  #77  
Old 10-10-2018, 12:33 AM
ohohyodafarted's Avatar
ohohyodafarted ohohyodafarted is offline
Bob Galanter
 
Join Date: Sep 2005
Location: Whitefish Bay, Wi (Milwaukee)
Posts: 981
The different part numbers can be accounted for by the fact that in the CT100 the transformer is "potted" in a 5 sided metal box that bolts onto the back of the HV cage. In the Westy, it is just an open frame transformer similar in appearance to a regular vertical output trans.
__________________
Vacuum tubes are used in Wisconsin to help heat your house.

New Web Site under developement
ME http://AntiqueTvGuy.com
Reply With Quote
  #78  
Old 10-10-2018, 04:50 PM
etype2's Avatar
etype2 etype2 is offline
VideoKarma Member
 
Join Date: Mar 2010
Location: Valley of the Sun, formerly Silicon Valley, formerly Packer Land.
Posts: 852
Quote:
Originally Posted by ohohyodafarted View Post
The different part numbers can be accounted for by the fact that in the CT100 the transformer is "potted" in a 5 sided metal box that bolts onto the back of the HV cage. In the Westy, it is just an open frame transformer similar in appearance to a regular vertical output trans.
I wonder why RCA took the trouble to put the transformer in a “box”? Isolation? Did this part fail in the CT-100 as much as the Westy?
__________________
Personal website dedicated to Vintage Television https://visions4netjournal.com
Reply With Quote
  #79  
Old 10-10-2018, 11:58 PM
ohohyodafarted's Avatar
ohohyodafarted ohohyodafarted is offline
Bob Galanter
 
Join Date: Sep 2005
Location: Whitefish Bay, Wi (Milwaukee)
Posts: 981
Quote:
Originally Posted by etype2 View Post
I wonder why RCA took the trouble to put the transformer in a “box”? Isolation? Did this part fail in the CT-100 as much as the Westy?
No way to know why RCA potted it in a box. Perhaps to better protect it from high humidity or dampness. Failure seems to be across the board in all the sets this trans is installed in. May have been due to defective materials or poor engineering.
__________________
Vacuum tubes are used in Wisconsin to help heat your house.

New Web Site under developement
ME http://AntiqueTvGuy.com
Reply With Quote
  #80  
Old 10-11-2018, 05:57 PM
etype2's Avatar
etype2 etype2 is offline
VideoKarma Member
 
Join Date: Mar 2010
Location: Valley of the Sun, formerly Silicon Valley, formerly Packer Land.
Posts: 852
Transformer ordered and shipped. Recapping continues, finding poor resistors along the way.

Link: https://visions4netjournal.com/westinghouse/
__________________
Personal website dedicated to Vintage Television https://visions4netjournal.com

Last edited by etype2; 10-12-2018 at 01:07 PM.
Reply With Quote
Audiokarma
  #81  
Old 11-15-2018, 05:00 AM
etype2's Avatar
etype2 etype2 is offline
VideoKarma Member
 
Join Date: Mar 2010
Location: Valley of the Sun, formerly Silicon Valley, formerly Packer Land.
Posts: 852
UPDATE, NOVEMBER 14, 2018, Day 106

From Mike,

“After a brief hiatus, recapping continues. Under the RGB Adders and amp circuits was a big resistance array mounted to terminal strips. This bank of parts prohibits access to the bottom of the chassis where the RGB adders and amp circuits are. After some study I determined that I can disconnect 4 wires that were going from the resistance array down to the RGB circuits and then remove the screws on the mounting plate allowing the entire array to “fold away” and “down” from the part of the chassis that I needed access to.

Picture #1 The new VDC transformer mounted but not yet wired.

Picture #2 Shows my “impossible access” to the capacitors that need replacing.

Picture #3 Shows the assembly pulled away and folded down after disconnecting the 4 wires. Full access to the components is now possible.

Picture #4 All new caps and some new resistors installed.

Picture #5 The assembly re-installed and the wires re-connected.”









Link to restoration page: https://visions4netjournal.com/westinghouse/
__________________
Personal website dedicated to Vintage Television https://visions4netjournal.com

Last edited by etype2; 11-15-2018 at 10:11 AM.
Reply With Quote
  #82  
Old 11-17-2018, 02:39 AM
etype2's Avatar
etype2 etype2 is offline
VideoKarma Member
 
Join Date: Mar 2010
Location: Valley of the Sun, formerly Silicon Valley, formerly Packer Land.
Posts: 852
Cabinet restoration begins.



Photos> https://visions4netjournal.com/westinghouse/
__________________
Personal website dedicated to Vintage Television https://visions4netjournal.com
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:15 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.