Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #33  
Old 09-15-2017, 12:16 PM
FrankieKat FrankieKat is offline
VideoKarma Member
 
Join Date: Feb 2012
Location: Brooklyn, NY, USA
Posts: 42
So I might have just hit a "duh" moment here. Reading the barely-legible scanned print at the bottom of the schematic it says "channel selected shown in channel 13 position" and "measurements taken with no signal applied". And well, I had previously been testing voltages with a signal connected. Now, with no signal I get pretty close to all of the voltages on the schematic -- of course with a signal they jump up to those much higher ones.

Based on that, would it be safe to say then that what I'm seeing is in fact the correct, normal working voltages (despite being quite a bit different) when tuned in?

FK

Last edited by FrankieKat; 09-15-2017 at 12:25 PM.
Reply With Quote
 


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:48 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.