Adjusting the AGC helped some. I found that now after I adjusted the agc, it will completely go away, but only if the h hold control is adjusted just right, turn it a little bit one way or the other and the problem can be made worse making the whole screen 'wavy' not just the top, while the horiz still remains in sync. The 'wavyness' still remains with the generator.
Adjusting the hv control did away with the horiz lin problem, the control was set all the way down, I adjusted it up until the linearity was right, about 1/3 of the way. I don't have an hv probe so I can't check what the hv actually is.
I also adjusted the focus control for a better picture, before I either had to choose between too dim, or up the brightness control and get a bit blurry, I always blamed it on the crt, but now the picture is way clearer.
Last edited by Adam; 09-13-2009 at 10:35 AM.
|