Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Vintage TV & Radio Tech Forum

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #31  
Old Yesterday, 11:34 PM
Jon1967us Jon1967us is offline
VideoKarma Member
 
Join Date: Nov 2018
Posts: 14
I have decided to tackle the board and try to disengage it from everything that's connected to it, so I can not only get at the diode, but take the opportunity to replace any remaining wonky components and check the traces, etc.

I don't have a video signal generator, so I'm going to have to rely on a conventional video source into the antenna input for now, but will try feeding into circuit in an alternate way, if I need to get to that point.


Reply With Quote
  #32  
Old Today, 10:30 AM
Electronic M's Avatar
Electronic M Electronic M is offline
M is for Memory
 
Join Date: Jan 2011
Location: Pewaukee/Delafield Wi
Posts: 10,376
It looks like if you can get that bolt and soldered on under board shield off you can work on the board without removing the board.

Be aware if you plan to power it up before fully reassembling it that you will need to jumper any desoldered board ground to chassis. PCBs of this period usually did not have a contiguous ground plane, but instead had a few separate ground traces that each went to one of the board solder mounts...The board solder mount grounds effectively tied together thru the chassis. If any solder mount is disconnected or has a bad joint the portion of the board it grounds will float and the circuits that use those ground points won't work (until reconnected to chassis ground).
__________________
Tom C.

What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4

Reading between the scan lines since the mid 2000's.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:45 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
ęCopyright 2012 VideoKarma.org, All rights reserved.