#1
|
|||
|
|||
mixer grid test point ctc 11 tuner
does anyone know where the mixer grid test point is on a ctc 11 tuner? thanks.
|
#2
|
||||
|
||||
The 6EA8 mixer - pin 2 grid test point is at L8, see lower right diagram, left hand bubble 1 and 6 point to it on one of the switch wafers.
The 3.1 MB source JPG was reduced by this site to 106kB so it may be fuzzy but shows the location. Appears to NOT be a feed thru, so it needs the cover off to access it. Hope you are successful. KRK98 tuner new vista.jpg
__________________
"When resistors increase in value, they're worthless" -Dave G Last edited by DavGoodlin; 11-18-2020 at 10:05 AM. Reason: add picture |
#3
|
|||
|
|||
Thanks. The ETF doesnt have a scan of the factory service manual. maybe a thought to scan it for them.
|
#4
|
||||
|
||||
That is a good idea. I only have the 10, 11, 12 and 16. So Ill see what they need.
__________________
"When resistors increase in value, they're worthless" -Dave G |
|
|