|
|
|
#31
09-17-2013, 02:42 PM
|
||||
|
||||
|
Well, I finally had a little time to work on vintage TVs (rainy Sunday). I went ahead and repaired/stabilized the broken CRT base as best I could. I used black sensor safe RTV and some good quality electrical tape. I replaced the piece of broken base I found in the cabinet. It was a good guide for positioning the base correctly. It's not the prettiest repair but it seems nice and secure and the CRT still tests fine
  I pulled the chassis which is now on my bench. I'm looking for a hard copy of the Sams (119-5) and then I'll place a cap order. It should be a fun fall/winter project! -Clark 
|
|
#32
09-17-2013, 03:09 PM
|
||||
|
||||
|
I have a scan of Sams 119-5, if that's any help. Send me a PM with your email address and I'll email it.
Regards, Phil Nelson Phil's Old Radios http://antiqueradio.org/index.html
|
|
#33
09-17-2013, 03:32 PM
|
||||
|
||||
|
Good luck. A RA-113 is being dropped off at my place tomorrow and I'll probably start on it this weekend.
|
|
#34
09-17-2013, 07:58 PM
|
||||
|
||||
|
Phil, thanks again for the scan of the Sams. I already got the Riders from ETF so I think I'm all set.
And Bob, that's great that you'll be working on an RA-113 too. I'm already looking forward to the excellent videos that I'm sure you'll make  -Clark
|
 |
|
|
Linear Mode
