#1
|
|||
|
|||
...
....
Last edited by wiseguy; 07-23-2013 at 11:39 AM. |
#2
|
||||
|
||||
Nice to see that set on its way to good operation.
__________________
Chris Quote from another forum: "(Antique TV collecting) always seemed to me to be a fringe hobby that only weirdos did." |
#3
|
||||
|
||||
Cool, looks like you are making good progress. Glad to see your CRT is good! When I get some time I'm going to try using the Sencore VA62 alignment procedure to try to get rid of my vertical white line. Good luck with yours.
Dave |
#4
|
||||
|
||||
Poor sync can still point to horizontal issues, make sure you have all the correct voltages. I just use the procedure in Sams, it's a good one.
__________________
Evolution... |
#5
|
|||
|
|||
...
Last edited by wiseguy; 07-23-2013 at 11:39 AM. |
Audiokarma |
#6
|
||||
|
||||
Quote:
From phase detector to reactance tube grid: M10101-ND (1 piece) Matrix output to CRT: M10093-ND (3 pieces) Y-line, near delay line: M10082-ND (1 piece) R-Y demod/amp: M10083-ND (2 pieces) Q demod: M10098-ND (1 piece) and M10127-ND (1 piece) Y-line near 2nd video tube, and matrix power input: M10106-ND (5 pieces) ^ That's from my CT-100 resto, but the 2 chassis are similar enough. I put the same coils in both my CT-100 and 21-CT-55, the colors on the screen were very nice. No one will know you didn't get correct pi wound coils, it dosn't appear to make any difference.
__________________
Evolution... |
#7
|
|||
|
|||
...
...
Last edited by wiseguy; 07-23-2013 at 11:40 AM. |
#8
|
|||
|
|||
...
...
Last edited by wiseguy; 07-23-2013 at 11:41 AM. |
#9
|
||||
|
||||
But you're SO close ! I wish I had, 1) a '50s color TV, & 2) the technical knowledge/ability to work on it & NOT kill it..
__________________
Benevolent Despot |
#10
|
|||
|
|||
...
...
Last edited by wiseguy; 07-23-2013 at 11:41 AM. |
Audiokarma |
#11
|
|||
|
|||
Well here Sandy, you can take this one on.
|
#12
|
||||
|
||||
Danke Schoen, but do the words/phrase "Bull in a China Shop" mean anything to you ?!?
__________________
Benevolent Despot |
#13
|
|||
|
|||
...
...
Last edited by wiseguy; 07-23-2013 at 11:42 AM. |
#14
|
||||
|
||||
Nice progress! The current through the fuse in my CTC2B is also right around 206-208. I think I finally have a good IF alignment, but I still have a little more work to do on the color alignment.
Dave |
#15
|
|||
|
|||
Last edited by wiseguy; 07-22-2013 at 01:25 PM. |
Audiokarma |
|
|