#1
|
||||
|
||||
My attempt at canister replacement
Well it's not the most elegant replacement, but it works and allows me to keep the original look by keeping the canister in place. I was going to use terminal strips, but it wouldn't have worked. I would have needed to extend wires and such. This way I only needed a heavy ground wire, a little hot glue to hold the pairs together, shrink tubing and a wire tie. They're not going anywhere and all leads and joints are protected from shorting.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650 |
#2
|
|||
|
|||
what is the deal with that dual back cap?
|
#3
|
||||
|
||||
There are a total of four caps there. Two for the 500uf and two for the 400uf.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650 |
#4
|
|||
|
|||
oh i see, it looked like a single cap with dual leads on that black one, but I can see two neg leads as well.
|
#5
|
||||
|
||||
Yep, ain't pretty, but quite functional.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650 |
Audiokarma |
#6
|
||||
|
||||
Realizing that re-stuffing can be time consuming and sometimes a pain to do, at least there was room for you to remount your caps.
|
|
|