#1
|
||||
|
||||
Vert Height Control for Zenith Roundie
Can anybody help me locate where the vertical height control is on the chassis of a Zenith Roundie?chassis #25MC30. It's not on the back of the chassis, as is the norm. A photofact would probably be good too.
__________________
Looking for a Commodore PET, always wanted one. Last edited by philtar0079; 04-07-2014 at 11:55 AM. |
#2
|
|||
|
|||
What is the part number? It should start with 63-. I have a number of NOS Zenith pots.
Steve |
#3
|
||||
|
||||
Mistake
Sorry Steve, I phrased the question wrong. My problem is that I can't find where the control is actually located on the chassis itself. I could probably just find it by following the traces for the vert. circuit.
__________________
Looking for a Commodore PET, always wanted one. |
#4
|
||||
|
||||
On most Zenith roundies, that do not have the pencil box that runs the length of the bottom, the height and V lin. controls are inside the front pencil box. Some have their own small hole others are concentric with a normal pencil box knob hidden in a hollow shaft of the concentric user control.
You will need long thin flat head screwdrivers to adjust them from the front.
__________________
Tom C. Zenith: The quality stays in EVEN after the name falls off! What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4 |
Thread Tools | |
Display Modes | |
|
|