#16
|
||||
|
||||
Quote:
Also my burban came with the only options an Escalade has (aside from general looks) that I would want to pay for: Leather interior and Heated seats.
__________________
Tom C. Zenith: The quality stays in EVEN after the name falls off! What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4 |
#17
|
|||
|
|||
Quote:
|
#18
|
||||
|
||||
Or turned it into a super fly ride with tinted windows, glitter paint and 22" chrome rims with spinners. Know what I'm sayin' homie?
|
#19
|
||||
|
||||
Quote:
__________________
Tom C. Zenith: The quality stays in EVEN after the name falls off! What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4 |
#20
|
||||
|
||||
Quote:
I will say, I quite like the Escalades more than their counterparts, at least when they've been well taken care of, and not butchered with 22s and tints and aftermarket radios. Very comfy and luxurious. Also, I once walked into a friend's body shop, and found him putting Escalade body trim onto a Tahoe. I asked him what he was doing. He said "I'm making a Escahoe." |
Audiokarma |
#21
|
||||
|
||||
Quote:
Last edited by Jon A.; 02-19-2018 at 05:12 AM. |
#22
|
||||
|
||||
Well, I did something stupid yesterday. ..Pa woke me up a bit early yesterday and said "come down quick I left a light on in my car yesterday and it won't start" After a brief futile attempt to start it off a charger I pushed it outa the garage and started my burban to jump it off of and whilst turning my burban around in the driveway half asleep I backed into a tree (that bird outhouse AKA dead tree woulda been gone last fall if ma hadn't asked me to hold off).
From a distance, you can't tell, but I now need a new rear bumper and factory hitch... The structure under the plastic step in the bumper busted free on one side and got punched in ~2.5" (the plastic step mostly hides it), the hitch also got pushed in some distance, is now a bit crooked and the metal tube that is it's biggest piece of metal split open in a couple of places (If It hadn't cracked I'd probably have tow chained it to the lincoln and tried to yank it straight). The good news is the frame appears to be fine...So I just need to find the right parts to bolt on...I'm probably going to leave it for now. I'm about a week out from paying off a student loan, and once I do that I'm going to have to save all my money for the ETF to be able to buy anything I haven't committed to yet. I'm nota happy camper.
__________________
Tom C. Zenith: The quality stays in EVEN after the name falls off! What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4 Last edited by Electronic M; 03-30-2019 at 10:04 AM. |
#23
|
|||
|
|||
But did you get your dad's car started?
. |
#24
|
||||
|
||||
__________________
Tom C. Zenith: The quality stays in EVEN after the name falls off! What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4 |
#25
|
|||
|
|||
If you are a camper, happy or not, I really recommend replacing that trailer hitch with a real one, instead of the factory issue version. That is, if you plan on towing anything and not just toting bikes or something.
I have an '03 2500, and had contact from someone from the NHTSB about those hitches. Evidently quite a few failures due to bad welds. Just a glance when first looking at it convinced me to replace the OEM hitch with one from a real hitch mfg. and not the exhaust pipe vendor (according to the guy at NHTSB.) I opted for both high capacity and extra tongue weight capacity, because I both tow and haul things on a hitch carrier. |
Audiokarma |
#26
|
||||
|
||||
I had a 3/5 tonne Urbanizer 4X3 & a Wiesel to boot. You could only get the Weasel w/a 4.11 back in '82, 45-50 MPH was the realistic top speed. 65 was possible, but it was in Major Patne at that, & anything beyond the valves wanted to float Me & Generous Motors put 3 motors in it B4 I hollered "Calfrope ! & got a Wagoneer Limited in '88. But except for the verdammte motor, its TOUGH to beat a Urbanizer, for what all they can haul. In fact, if you CAN'T haul something in one, you gotta aks yrself "Do I REALLY need this ?!?"...Boy, we had Big Fun in Sandy's Suburban Social club back in the day, too-I'm pretty sure a couple kids were conceived in it. Mine had Captain's Chairs, but I could still get a good 8-10 people in it. They'd all get in the "Back-Back"behind the 3rd seat where I couldn't swat 'em. I bought a Blaupunkt Berlin & 4 Jensen Triaxials & THAT tickled everybody, too. Had more fun in The Urbanizer than I've had in any other vehicle, before or since. Just wish that 6.2 litre Weasel hadn't been such an unmitigated POS-I might still have it...
__________________
Benevolent Despot |
#27
|
||||
|
||||
Gotdangit, Fat Fingered Freddie- 4X4 & 3/4 tonne... This is what happens when you have "Cadillacs" & CAN'T EFFIN' SEE.....(GRRRRRRRRRRRRRR...)
__________________
Benevolent Despot |
#28
|
||||
|
||||
Well I ended up buying a used bumper and hitch off of a Yukon. The corner cross brace brackets were rustier than the ones on my old bumper so I performed the punishing act of swapping them....the carriage bolts they used have such a small squared off shank that removing them with anything other than a grinder is barely possible. End result turned out nice though.
Then the weekend before the 4th and into the 4th I ended up re-repairing the driver's side rust out on the rear quarter and rocker panel. The rocker had rusted out before and had a Bondo patch with a empty bag of cheese puffs and a purchase order ticket from a crummy Mexican body shop that did the the repair. They also fixed the quarter being mashed in in a collision the previous owners were in by covering it in 1/2" thick layer of body filler.... Seeing the old repairs failing and not wanting to fill holes bigger than a quarter with body filler, but not wanting to spend $500 on buying a welder or the time to learn to weld I came up with a unique solution. I cut squared off holes removing the rusted through sections of sheet metal and grinding the edges to bare metal. I then took the bare edges and tinned them with my 80W soldering iron in roughly 1/4" perimeter around the hole, did the same for a piece of 26guage sheet steel cut bigger than the hole, painted the untinned inside surface of the patch then soldered it on and covered it with body filler and paint to hide it...it went great on the quarter (no one can tell it was patched). The rocker was tough because the bottom section I was patching had a sharp bend that my initial approach could not properly duplicate, and it is not perfect but much harder to spot than a over 2' long rust hole... I considered re-doing it but with vacation (that truck went with on) under a week away I was lucky to complete it at all... Passenger side is the same but the rust is a bit worse... I'm probably going to fix that too.
__________________
Tom C. Zenith: The quality stays in EVEN after the name falls off! What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4 Last edited by Electronic M; 07-15-2019 at 05:17 PM. |
#29
|
|||
|
|||
Quote:
|
#30
|
||||
|
||||
Quote:
The one you saw I could find the patch with light at the right angle...the one I did since then I can't even figure out exactly where the patch is anymore.
__________________
Tom C. Zenith: The quality stays in EVEN after the name falls off! What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4 |
Audiokarma |
|
|