#1
|
||||
|
||||
Got a free Plasma, need help!
A friend gave me his 2009 Panasonic TC-P50S1 Plasma set because it died.
I'd like to get it going for a spare if possible. The set will power on and click, the fans run on high speed for a second then it shuts down and the light flashes ten times. I have to unplug the set for a while to reset it so it will power on again. Following this rather lengthy thread I'm getting the idea the SC board might be the problem. http://www.justanswer.com/tv-repair/...html#re.v/266/ If I disconnect the SC board I get the voltage at the power connector that slowly drops after it shuts down, the fans run at a normal speed, and it runs much longer before shutting down and then flashing code six (with the SC board disconnected) Also if I plug the power connector back into the SC board I get a large spark and the voltage immediately drops to zero. I would be willing to spend the money on a refurbed SC board if there was a high probability it would fix it. |
Thread Tools | |
Display Modes | |
|
|