#1
|
|||
|
|||
Looking for a GE 9-7500 schematic
Hi guys, I'm wondering if anybody can hep me find the schematic for this 1987 GE 9-7500 VCR.
The VCR's VFD isn't working but I found out that there is no power to the filaments. Both lines the filament go directly to the power supply and I'm trying to fix it, and a schematic would help alot. Actually the is no voltage between the filament pins but there is 3.3V present from each filament to ground. If I short one of the filaments to ground the VFD will work but quite dim. Here's all I know about the VCR: It was built by Panasonic It's virtually the same as a Panasonic PV-4720 but with a different shell. I've seen two youtube videos of a 1987 Sylvania VCR and a 1987 JCPenny VCR with the exact same insides but the posters didn't say what model they were. The main board has the following info: ASSY.NO. VEPS0289 VJBS0289 MH437F I've searched everywhere, can't find anything based on that info. If a photos help to identify the VCR I'll post them. Thank you. |
#2
|
|||
|
|||
Checked the Sam's website?
https://www.samswebsite.com/en/photo...index/id/56770 Looks like they have 204-page copies of the original GE manual available. . |
|
|