#16
|
||||
|
||||
Quote:
I'd love a long nut driver. What I've been doing is putting together all of my bit holders together to make a long one. Only issue with it is that it flexes like crazy and I have to hold it about 2" higher on the back end so the head is at the level of the fastener. LOL!
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650 |
#17
|
||||
|
||||
Well the new coil worked like charm. It's an exact replacement.
I managed to get the convergence touched up, but the darn blue lines on the left and right (especially right) side of the screen do not curve like the red and green. If they would just bend up about 1/4 inch or so, the convergence would be about perfect. Oh well.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650 |
#18
|
||||
|
||||
dont fret.all these zenith suffer from the same affliction.tweak it until you cant see it from 8 to 10 feet.all 4 of my chromacolors are the same way.post more pics
|
|
|