|
|
|
#1
08-20-2013, 11:01 AM
|
||||
|
||||
|
My attempt at canister replacement
Well it's not the most elegant replacement, but it works and allows me to keep the original look by keeping the canister in place. I was going to use terminal strips, but it wouldn't have worked. I would have needed to extend wires and such. This way I only needed a heavy ground wire, a little hot glue to hold the pairs together, shrink tubing and a wire tie. They're not going anywhere and all leads and joints are protected from shorting.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650 
|
|
#3
08-20-2013, 11:19 AM
|
||||
|
||||
|
Quote:
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|
|
#5
08-20-2013, 11:27 AM
|
||||
|
||||
|
Quote:
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|
| Audiokarma |
 |
|
|
Linear Mode
