|
|
|
|
|
#1
12-07-2014, 12:10 AM
|
|||
|
|||
|
I was a little quick to say things are good, I adjusted the linearity and with it set properly I don't have anywhere near enough height or width. I did some reading and the book I have says the problem could to low B+ or high HV, the B+ is good but the HV is a little on the high side. The info I have says it should be 14kv and it measures 16kv. Is that enough to cause this kind of problem?
Gregb 
|
 |
|
|
Hybrid Mode
