Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Diagnostic & Test Equipment

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 12-15-2017, 03:18 PM
stromberg67's Avatar
stromberg67 stromberg67 is offline
VideoKarma Member
 
Join Date: Sep 2009
Location: Ellington CT
Posts: 179
Question Telematic color jig help

Hi, I was generously given a Telematic/RCA color jig, and found two wires on the yoke adapter Molex connector broken from the pins . The colors are orange and gray. Can anyone identify which pins those wires go to ? Crude hand drawing attached. Thanks, Kevin
Attached Images
File Type: jpg Telematic Molex Cable yoke adaptor (Medium).jpg (27.2 KB, 24 views)
Reply With Quote
  #2  
Old 12-18-2017, 09:29 AM
Kevin Kuehn's Avatar
Kevin Kuehn Kevin Kuehn is offline
Workin' Late Again
 
Join Date: Jan 2011
Location: WI
Posts: 3,824
Hey Kevin,

I don't have specifically the info you're asking asking for, but have you seen the below ARF thread? Can you tell anything from the pictures Brian(Findm-Keepm) posted? Otherwise you could look at the wiring on the back(inside) of the jig connector, because I would think everything would follow straight through. Otherwise drop Brian a line and I'm sure he can set you straight.

http://antiqueradios.com/forums/view...p?f=3&t=308119
Reply With Quote
  #3  
Old 12-18-2017, 11:59 AM
stromberg67's Avatar
stromberg67 stromberg67 is offline
VideoKarma Member
 
Join Date: Sep 2009
Location: Ellington CT
Posts: 179
Thanks Kevin. The ARF post is a big help. After the holidays I'll open the jig and compare the wiring on the female Molex. Shouldn't be too hard to figure what's what. I also have a CK-3000, but no adapters for that one. Many for the RCA.
Thanks again!
Kevin G.
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:56 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.