Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Solid State CRT Televisions

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #3  
Old 10-06-2017, 10:17 PM
Findm-Keepm's Avatar
Findm-Keepm Findm-Keepm is offline
Followin' the Rules...
 
Join Date: Jun 2007
Posts: 2,836
Quote:
Originally Posted by user181 View Post
I've only now discovered that Panasonic has discontinued manufacture of snap-in electrolytic capacitors.

Of the remaining manufacturers, which one(s) do you guys regard as making good capacitors?

I found an equivalent-spec capacitor at Mouser made by United Chemi-Con -- what do you think of them?

Thanks!
What value and voltage?

Panasonic obsolete types continue to be stocked in depth by both Digi-Key and Mouser - unless you're needing production quantities (in which case Panasonic WILL open up the line...), you should be good. Digi-Key's selection:

https://www.digikey.com/products/en/...=0&pageSize=25

EPCOS is my second choice in snap-in capacitors - Panasonic and NiC Components for all others (Radial Lead and SMD). Production of types/series are single-sited for Panasonic and NiC, meaning not much variation, as compared to Nichicon, UCC, and Lelon. They produce in multiple sites, and some type/series have differences among the plants - they are using "lessons learned" from the Fukishima disaster, when Panasonic and some others had long lead times, from no power, reduced power, shipping issues and the like. Dual-siting helps reduce the impact, but led to quality problems, mostly minor electrical and physical characteristic variances.
__________________
Brian
USN RET (Avionics / Cal)
CET- Consumer Repair and Avionics ('88)
"Capacitor Cosmetologist since '79"

When fuses go to work, they quit!
Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:03 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.