|
#1
|
|||
|
|||
Yes I figured that it was pin 1 because that's where the connection from the IF section comes to the video tube just like the admiral , it uses pin 4 for the sane connection.
It is interesting to note that pin 1 is the spot where the voltages are the most crazy , should be 1 volt and I have 18 volts . |
#2
|
||||
|
||||
That doesn't sound right. You better double check the other pin voltages on that 6AH6. If you do inject video into pin 1 you might want to go through a .1uf cap.
Last edited by Kevin Kuehn; 12-07-2017 at 12:43 AM. |
|
|