Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Diagnostic & Test Equipment

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 01-01-2014, 05:27 AM
Adam's Avatar
Adam Adam is offline
VideoKarma Member
 
Join Date: Oct 2005
Location: Phoenix, AZ
Posts: 2,344
RCA remote control standard SC-601

Basically this unit will substitute for the remote control and transducer. It produces a signal at all the frequencies listed on the 2 dials, modulated or not (notice later the addition of the 2nd dial and set of crystals for the frequencies for remotes, which according to the chart on top are for CTC 38-71 sets).

All I did to it was recap, replace the missing screw terminals on the front, and clean some rust off the chassis. Pictures show it working. This is an unusual unit and I haven't found any information on it, even looking in the old RCA test equipment catalog I have. Date on the front says 12/66, which makes sense as it doesn't produce the frequencies corresponding to the older CTC 9-10-11 remote you see me testing it with in the pic. The 5th pic shows the unit producing its own signal, in the 6th it shows what it's receiving from the remote.

Last edited by Adam; 11-24-2016 at 08:55 AM.
Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:51 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.