|
#1
|
||||
|
||||
There is an electrolytic on the cathode of the vert output that
causes the bottom to pull up. Eventually the vert should be recapped except for the discs. Also the 3 legged integrators changed. Check all resistors especially high ohms ones. Do recapping one at a time then test to be sure of no mistakes. These will be of interest........ https://www.youtube.com/watch?v=vt7OLBCoR8o https://www.youtube.com/watch?v=6lZIJQ-cKDs&t=141s 73 Zeno LFOD ! |
|
|