Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Transistor Radio

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 10-12-2017, 01:57 PM
Jeffhs's Avatar
Jeffhs Jeffhs is offline
<----Zenith C845
 
Join Date: Feb 2003
Location: Fairport Harbor, Ohio (near Lake Erie)
Posts: 3,480
No AM broadcast band reception on Zenith TO 3000-1

Greetings.

I have a Zenith TO 3000-1 radio (an eBay find several months ago) which works and sounds great, but has no reception on the standard broadcast band. I was told by a VK member (Broadcaster, IIRC) that this problem is caused by a shorted transistor, but I am not sure which transistor out of the 12 in the radio is bad. I obviously do not want to "shotgun" replace every transistor (though I could, since I have another TO 3000 in storage) because all other bands, including FM, work very well. I am thinking the band switch might have one or more corroded or defective contacts, since the other AM bands (SW) came to life when I jiggled the switch a bit; however, trying the same trick on the BC band did not produce the same results. I downloaded the service manual and now have it as a .pdf file on my computer, should I need it for further troubleshooting.

Thank you.
__________________
Jeff, WB8NHV

Collecting, restoring and enjoying vintage Zenith radios since 2002

Zenith. Gone, but not forgotten.
Reply With Quote
  #2  
Old 10-12-2017, 03:44 PM
tom.j.fla tom.j.fla is offline
VideoKarma Member
 
Join Date: Aug 2014
Location: Dover,Fl
Posts: 255
Jeff, check your MW osc coil. On my D-7000 and ROYAL 7000-2 those coils were open. All the best,Tom.J
Reply With Quote
  #3  
Old 10-17-2017, 02:44 PM
jr_tech's Avatar
jr_tech jr_tech is offline
VideoKarma Member
 
Join Date: Sep 2009
Posts: 3,593
There are 3 transistors in the 3000-1 that are not also used for FM reception or audio. These are the 121-349 AM RF, the 121-351 AM Mixer and the 121-350 AM Oscillator. They are located in the upper left corner of the chassis (as viewed from the back).

However, it is unlikely that any of these is bad if your Shortwave bands are still working.

jr
Reply With Quote
  #4  
Old 10-17-2017, 05:16 PM
Sandy G's Avatar
Sandy G Sandy G is offline
Spiteful Old Cuss
 
Join Date: May 2003
Location: Rogersville, Tennessee
Posts: 9,098
There is a good article on properly cleaning the bands on TOs in this month's "Electric Radio". Likely more geared to the Tooob versions, but I'd imagine the soiled state sets could benefit as well.
__________________
Benevolent Despot
Reply With Quote
  #5  
Old 10-31-2017, 09:11 AM
Gregb Gregb is offline
VideoKarma Member
 
Join Date: Jul 2014
Location: Edmonton Alberta Canada
Posts: 506
I had the same issue with my 3000-1 and it was the AM osc transistor. Changed it out and away it went.

Gregb
Reply With Quote
Audiokarma
  #6  
Old 10-31-2017, 03:47 PM
jr_tech's Avatar
jr_tech jr_tech is offline
VideoKarma Member
 
Join Date: Sep 2009
Posts: 3,593
Quote:
Originally Posted by Gregb View Post
I had the same issue with my 3000-1 and it was the AM osc transistor. Changed it out and away it went.

Gregb
Were the shortwave bands still working ok? AM was the only dead band?

jr
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:41 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
ęCopyright 2012 VideoKarma.org, All rights reserved.