![]() |
#1
|
|||
|
|||
WTB 9/7 pin PCB mount tube sockets
Hi All,
I am looking for some 9 and 7 pin PCB mount sockets. Thanks! Jonathan |
#2
|
||||
|
||||
They have several 9 pin PCB types....only seeing 7 pin solder lug types.
Maybe a phoney call to them may yield you some results. https://www.tubesandmore.com/product...ramic-pc-mount
__________________
Let me live in the house beside the road and be a friend to man. |
#3
|
|||
|
|||
Celt,
Thanks for the link! Those look like they would work for the 9 pin. Sadly, what I really need is 7 pin. I'm still hoping to dig up some older ones, just for appearance. But if I can't, those look great. BTW, your avatar reminds me of a shirt I once had and my old friend Jed. Best dog in the world, still miss her. Thanks! Jonathan |
#4
|
||||
|
||||
How many do you need? Try surplus sales of
Nebraska, triode electronics, Angela instruments, antique electronic supply, eBay, etc |
#5
|
|||
|
|||
I was hoping to find some older ones here. Now that I have been working on this I realize that I can't find any with the center solder pin. Looking at the PCB of my predicta, I think they might need to be as most of them connect to traces on the PCB. Not sure how important that is.
Thanks! Jonathan |
Audiokarma |
#6
|
||||
|
||||
Ohh for a predicta
Center pin isn't all that important. Easiest would be to find some junk tv or radio chassis and salvage the sockets. Any sort of board mount socket can be made to work. Just Make sure to use a tube shield if factory did. Probably shouldn't need to change them all on a predicta, on my predicta all the original 7 pin sockets were OK. |
#7
|
||||
|
||||
Surplus Sales of Nebraska
https://www.surplussales.com/Tube-So...ubeSkts-2.html 7-pin (TUA) MSM-1441-200 or (TUA) 7P-CP - the shield is easy to remove if you don't need it. 9-pin (TUA) 751V504C06 |
#8
|
||||
|
||||
Also try Radiodaze of upstate NY, http://www.radiodaze.com/tube-sockets/
great hit or miss variety and reasonable prices.
__________________
"When resistors increase in value, they're worthless" -Dave G |
#9
|
|||
|
|||
Found some here:
https://www.talonix.com/shop/ Seem like good replacements, they have the center pin. I ordered a full set of them for the Predicta but am only going to replace the bad one. I just wanted some on hand for the future. Thanks for all of the help! Jonathan |
![]() |
Thread Tools | |
Display Modes | |
|
|