Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > VideoKarma Classifieds

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 06-10-2015, 12:57 PM
walterbeers walterbeers is offline
Old TVs are better!
 
Join Date: Jun 2011
Location: Omaha NE
Posts: 448
Need extension cables for round CRT 21FJ style and Yoke

I would like to find a couple of extension cables in order to operate round color console (21CY/FJ/AX) type chassis outside of the cabinet, while yet hooked up to the CRT, in the cabinet. I need an octal extension for the yoke, and also one for the CRT, which is the large 14 pin that fits the round color CRTs. (I have cables for the convergence and high voltage), just need to have extensions for the CRT and Yoke. If anyone has either of these that they would like to sell, let me know. Maybe someone has some cables from a test jig they no longer use, or even something someone has made. I could also make them up, if I just can get the sockets. I need both male and female socket ends for both the yoke and CRT. Thanks. wjb122750 at hotmail dot com. Or contact me on VK.
Reply With Quote
  #2  
Old 06-10-2015, 07:44 PM
walterbeers walterbeers is offline
Old TVs are better!
 
Join Date: Jun 2011
Location: Omaha NE
Posts: 448
Another thought:, does anyone have a junk 21 inch roundie in which you could save the socket on the back for me. I'll pay for it plus shipping. Any socket that is glued on to a 21fjp22, fbp, cyp,etc, color tube. All I need is just the socket.
Reply With Quote
  #3  
Old 06-11-2015, 03:06 PM
Steve D.'s Avatar
Steve D. Steve D. is offline
VideoKarma Member
 
Join Date: Sep 2002
Location: Hollywood Hills, Ca.
Posts: 1,707
A roundie picture tube brightener might solve the picture tube socket request.

Ie: http://www.ebay.com/itm/Vintage-Perm...item35e91c151d

Make sure the brightener is for the round 70 degree CRT.

-Steve D.
__________________
Please visit my CT-100, CTC-5, vintage color tv site:
http://www.wtv-zone.com/Stevetek/

Last edited by Steve D.; 06-11-2015 at 03:23 PM.
Reply With Quote
  #4  
Old 06-12-2015, 02:29 PM
walterbeers walterbeers is offline
Old TVs are better!
 
Join Date: Jun 2011
Location: Omaha NE
Posts: 448
Good Idea, I never even thought about that. Only thing I would do is to wire the filament direct, instead of using the boost, or use an isolation booster. But it would give me enough extra room to hook up the tube while in the cabinet. Sometimes I don't think my head is even attached! Good idea. Thanks!

Nice idea, I found a brightener locally, that will work and give me room to extend the CRT socket. So, problem solved.

Last edited by walterbeers; 06-12-2015 at 03:06 PM.
Reply With Quote
  #5  
Old 06-12-2015, 08:55 PM
walterbeers walterbeers is offline
Old TVs are better!
 
Join Date: Jun 2011
Location: Omaha NE
Posts: 448
Problem solved, Steve McVoy from the ETF is going to send me a cable and sockets that he has. Also the booster idea is great as well. Thanks to everyone who came up with ideas and cables/sockets.
Reply With Quote
Audiokarma
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:04 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
ęCopyright 2012 VideoKarma.org, All rights reserved.