View Single Post
  #124  
Old 10-02-2017, 12:56 PM
SwizzyMan's Avatar
SwizzyMan SwizzyMan is offline
Restoring an admiral c322
 
Join Date: Apr 2015
Location: Side Lake Mn
Posts: 886
Quote:
Originally Posted by old_tv_nut View Post
Well, 'tis a puzzlement to me. The only thing I see near the switch (which opens B+ to the bandpass amp) is a 6800 ohm and 0.1 uF bypass. It's a wild guess, but you might check those. Also make sure the grounds on the chroma board are solid.

Everything else in the chroma section is running with chroma on or off, so it's hard to see how it could be there.
Resistor and capacitor check fine and the grounds are all solid. I am at a loss.
__________________

Admiral C322C2 Regent (Restoring)
RCA CTC-7 Pensbury (Restored)
RCA CTC-5 Westcott (Restored)
CRA CTC--4 Director 21 (Restoring)
Reply With Quote