View Single Post
  #26  
Old 12-10-2017, 12:20 AM
kramden66 kramden66 is offline
VideoKarma Member
 
Join Date: Nov 2010
Location: Rockaway, NJ
Posts: 1,414
Well I hooked to pin 1 with a .1uf and plugged it into a DVD player , I have an image , there are bars on the left side of the screen but that can be dealt with later , the first DVD player I used the image was ok but when you tried to put more black into the image it would cause black lines to reach across from the left and turn it higher it was like overloaD and smeared , so I tried a different player and a better image that if you turn the contrast up you get blacks and if up all the way a slight overload in the whites and a buzz in the sound , a video type buzz.
So it would appear that what ever is wrong it is before the video tube , I will try further but if I give up I can just feed to the video and audio , question is what would happen if I reduced the .1 to a .01 ? What would happen if I went from .1 to.5 ? Any ideas ?

Last edited by kramden66; 12-10-2017 at 12:28 AM.
Reply With Quote