Quote:
Originally Posted by zeno
Before you go further make 2 DC measurements.
1) measure the collector of one of the 3 video outputs on
the CRT socket.
2) the G-2 ( screen ) voltage at the CRT socket.
This narrows things down.
The colored blobs are normally seen at turn off & is usually normal.
BTW try the G-2 control on the FBT. Just turn it up a tad.
73 Zeno 
LFOD ! |
I have a lot of stupid questions since i have never really taken a voltage measurement on the CRT out of fear of damaging tools.
What is the collector and where do I find it? I'm also not sure how to measure the G2 voltage. I know of the G2 controls but not where to check the voltages.
Which G2 control and what is the "FBT"? Sorry about the stupid questions.