Quote:
Originally Posted by Steve McVoy
This set was in the collection of Danny Gustafson, who had many of the sets he owned restored by Dave Johnson. That may explain why it came up so easily.
|
That is my belief as well, Steve. Most of the lytics had previously been replaced, except for the PS ones I just did.
Thank you, everyone. This set will be very enjoyable, I plan to own it for a very long time. I ran into a little problem last night where it would received color, but the luma channel was d-e-d DEAD. For some strange reason, the 2nd video tube plate was at 0 volts and I couldn't figure out why. I disconnected the parallel coil and resistor going to the matrix and it popped back up to normal showing luma bars on the scope, and when I reconnected it was working. It's still working as of this morning, so it's some kinda phantom or self induced gripe. Probably dislodged a bead of solder or something.
Anyhow, the raster is slightly tiled so next up is screen geometry and convergence.