[SwizzyMan]

Originally Posted by DaveWM

the general conscience is there is no conscience.

Some like epoxy, some like silicone (wire safe), some like super glue (I used the flex zap in the past), some like white glue... it goes on and on and on.

Hence my recommendation to simply wrap some electrical tape around it to stablize, get the set working, then you can spend time researching what you think is the best approach. The issue I see you have is the sloppy work already done may make removal a iffy thing. And you don't want to follow up that sloppy work with more perm glue that will just make it harder to do right at some point in the future.

often times LESS is MORE in tv work. this is why untouched sets are prized over "restorations" unless the restoration is done by someone that really is good at it.
Clearly this was not the case with your CRT socket.
At some point you may have to address it (like if you had to replace the yoke), right now its a non issue to get it working, just don't do more damage to it than already done.

Yeah I'll just electrical tape it for now. Heh, maybe you could stop by and help out.