I do not have one of those. I am beginning to think that this slug may not be a good replacement after further examination. It will thread fine into the coil, but once the threads reach the area where the coil winding is located, it starts to get pretty hard to turn with any plastic alignment tool. I'd rather have a hex keyed one anyways, but the slot was worth a try. I checked every extra chassis I have and parts piles and still can't find anything identical to the original. Searching online yields no good results on replacements either. Really at a loss right now. Someone has to have one right?
__________________
Admiral C322C2 Regent (Restoring)
RCA CTC-7 Pensbury (Restored)
RCA CTC-5 Westcott (Restored)
CRA CTC--4 Director 21 (Restoring)
|