View Single Post
  #8  
Old 08-08-2016, 02:26 PM
Username1's Avatar
Username1 Username1 is offline
Not sure how I got here.
 
Join Date: Dec 2009
Location: Orange County NY
Posts: 3,584
measure the dam thing center to both ends, one way there should be a reading,
then double it. Even if you have to cut it in half with a dremel & cutting wheel.

My Mr. Coffee died of hardening of it's single artery. I got now the wife's older
procter-silex, no timers on either one, I herd about them and fires back in the
80's so I'm chicken of them forever now....

I run vinegar through them with each use now to keep calcium from building up.
The old one leaked and the calcium build up made it take 40 minutes to make
a single pot of coffee...... Built up over time so it was not noticeable

But now at about 4 minutes to make a pot, wow how did I not notice it
before.....

""" After 5 short years, my uncle's coffee maker activated its' "planned
obsolescence" feature ....... """ Priceless ! !

Get a schematic from http://oemplannedobsolescencedevices...ers/index.html

.

.
__________________
Yes you can call me "Squirrel boy"

Last edited by Username1; 08-08-2016 at 02:38 PM.
Reply With Quote