|
SOME ADDITIONAL DETAILS:
-The vertical output tube was replaced with a new one.
-The pins of each of the local tubes have been cleaned and re-cleaned. When the TV is fired up, and I move the local tubes in the vertical circuit (The 7N7s and the 7F7s), no change in picture. I believe that they're all making contact.
-Replacing the tubes that I had found in the set originally with new ones of the correct values makes 0 difference in picture.
-Riders TV Series doesn't have my set
-I did try wiring the original transformer back in, and no change in picture once again
-Sorry, my estimate was off. The raster is probably 2" high.
-I tried my damnedest to replace the capacitors in the set with capacitors of EXACT value when replacing the caps.
Where should I start in searching for a problem?
|