Ok now I know it's fine. But now I have another possible issue. When checking voltages on the power transformer for the plate supply I get lower than expected voltages. On pin 6 of the rectifier tube I get 256 volts and on pin 4 I get 195 volts. The schematic calls for a plate supply voltage of 280 volts. Could my power transformer be bad or are these results ok?
__________________
Admiral C322C2 Regent (Restoring)
RCA CTC-7 Pensbury (Restored)
RCA CTC-5 Westcott (Restored)
CRA CTC--4 Director 21 (Restoring)
|