View Single Post
  #13  
Old 10-08-2012, 06:29 AM
timmy's Avatar
timmy timmy is offline
VideoKarma Member
 
Join Date: Jan 2011
Location: ferndale ny
Posts: 3,504
well i am still at it and i find that for some reson the boost votage is not there and the hv is at 2500kv not enough but also found that alot of 16v caps have no voltage then put a jumper from 12v to one of those caps and back fed and now i got 8kv on the crt and full screen but its still not right i cant find a break in the trace or a bad diode or anything it just dont make sense. i put the cable wire on and it has a hard time holding the signal and when it does i have 3 images with lines so the horiz timing is off so this jumper is not the fix. nothing burned either.
Reply With Quote