|
Not to sound alarmist or anything, but it's rare for even a new CRT to tip the scale all the way to 100%. Try this: read for emission while slowly advancing the cutoff knob from full CCW to CW. If you are able to modulate the emission with the cutoff knob in a linear fashion you're good, but if at some point in advancing the cutoff knob it suddenly shoots up to 100% from nothing you have a gassy tube on your hands. I only mention this because at one time I had to understand why a 21AXP22 I had was testing new but glowed purple in the neck when powered by an actual chassis- it has to do with the fact that any gas inside the tube turns it into a gas regulator instead of an electron emitter. As you advance the cutoff control, at a certain point the gas inside will ionize. Once that tipping point is reached and the gas ionizes, it will read 100%.
Only sure way to know is put HV on it. If you can put 20kv on the ultor rim and not see a blue/purple glow, I'd call it a winner.
__________________
Evolution...
|