|
well no its not fixed now the hv pot only raises up to 14kv and seems stable not jumping around but its to low.i will be pulling up the 6bk4 cap and see the hv then ill be pulling the 12by7a and see the hv and ill be lowering each color gun to see again if the voltage goes up to see if infact i did not get rid of the shorts that i found in the crt the one gun that is turned down that raises the hv to where it should be where may indicate a short condition in the crt, at least i think. after removing the shorts in the crt neck and i seen the little arcs i did get a much better picture but it may need more.i also double checked the 2 1.5 meg resistors and they are 1.600 and 1.617. something is clamping the voltage for sure but what i dont know and i hope its not the crt, the crt has very good emissions, good is 200 or more and it tests almost 400.
|