View Single Post
  #10  
Old 11-23-2017, 01:22 PM
tom.j.fla tom.j.fla is offline
VideoKarma Member
 
Join Date: Aug 2014
Location: Dover,Fl
Posts: 250
Timmy, dieseljeep is saying that the heater current of the 14ATP4 is different than the crt you have in your set. If you do what dj says you put the 50 ohm 2 to 3 watt resistor across the 14ATP4 heater only, that combo makes the current draw of the crt resistor pair 600 ma. to match the current draw of the rest of the tubes in the set. If I did the math right a 24 ohm 3 watt resistor will be just right for the crt shunt resistor. Tom.J

Last edited by tom.j.fla; 11-23-2017 at 01:33 PM.
Reply With Quote
Audiokarma